Vapeciga vaporesso gen kit come in various colors:
– Midnight Blue
– Red and blue
– filling tank capacity: 5 ml / 2 ml
– Output Watt: 5-100W
– Resistance Range: 0.03-5ohm
– Simple Battery: 21700/20700/18650
– Charging current: 2A
In the frame:
– Armor Pro Mod
– 18650 Adapter
– the baby tank CASCADE (02:05 ml)
– mesh coil (0.18O) already installed
– GT CCELL2 coil (0.3O)
– USB Charging Cable
– User Guide
Baby Cascade sub-ohm tank can be purchased separately in various colors:
– O bright
Vaporesso swag mod show new cascade sub-ohm baby is very similar to reservoirs cascade sub-ohms, but there are differences and different capacities. I received a baby waterfall in black and looks good in my opinion. You can see some details on the plastic cap and can see the same details in the control ring airflow. In addition to the ring airflow, you can see engraved “Vaporesso” and the bottom of the tank, you can see recorded “Baby Waterfall” and “Designed and manufactured by Vaporesso”. Sub-ohm tank diameter is 24.5 mm, 58 mm high with drops peak, the baby cascade 5ml capacity, or can buy a release capacity of 2 ml tpd.First, what I want here over filling the tank, to fill the tank is very easy and I liked the fact that there is no chance you can open up the possibility of charging, you just pull the pieces of plastic and a boost to the side, when only fill reintroducing plastic parts and ready. About coils that have received the package, two coils work well. With coil CCELL there is much less air flow, but the thread of a batch of rolls GT airflow, so if you want a tight coil CCELL tie for you but if you like a lot of airflow want more mesh coil.
steam production in the sub-tank ohm very good to force recommended, of course, more steam coils nets but also will have more power to it. solid feel, I think it’s better with a spool of thread, but you can feel better with CCELL coil. Moreover there is no leak here.
What you may not like this is when you want to change the coil, for example, you must have a metal part of the tank and unscrew the base, because if the glass is maintained or even a fireplace without a roof top deck with the basis to dump thread.
The vapeciga vaporesso pm80 is also compatible with babies animals of the coil, which is a professional network.
To change the coil needs to unscrew the base, the base has a standard thread and screw the coil at the bottom. Put on right here. As always before refueling, should privileged coil with few drops post raps to prevent and after fillable tank and used immediately. Coils works well with liquid and I use vg-pg 70-30 and leaks.From the top you can see the relationship mod crimped stainless steel, because here is very good and here you can see the gold-plated spring pin 510. You can see the attractive design and the connection 510 is here mod will not be removed from the atomizer. You are employed here every atomzier diameter of 26 mm without being false.
We have some details about the mod on both sides, you can see engraved “Armor PRO” and behind the mod that you can see engraved “Vaporesso”. Always on the side mod you can see USB port for charging and improving deivde, 2A fast charge mod operator.
At the front of the mod, you can see the buttons select the shutter button on the screen, buttons and more and less.
Just below the peak fall in one piece of plastic, the parts are here to improve the system of charging up, blocked, and because there is a possibility that the plastic parts of the upper lid can be opened at random, which is very good. In the plastic, you can see the designs that will be easier to pick up the pieces and interesting. You can unscrew the plastic, but has a reverse thread. If you open the top section, you can see under the piece of metal and you can see how the charge here. Top fill out here is very interesting and something different from the other tanks bits. For the filling, you need to take a piece of plastic and interesting and can be ruled out, also on the upper deck, you can see where you have to push to open it. Holes for liquid letter is fine, maybe you will not have a problem to fill the tank.
Waterfall tank with a glass tank, this tank has a capacity of 5 ml was very nice. In the package, you receive the glasses back up if they break one.
To lock the device, you need to zero vape pod click in the shutter button, the same you have to do to unlock the device. When the model is locked, you will not be able to use the plus and minus buttons, but still be able to use the shutter button and the vaporizer. When the device is locked when each key is pressed as a small screen, you will see how to unlock the device and how to turn it off. When the MOD is off the screen, you can see the map and software versions.
There’s nothing here crackles buttons, very clicky, everything is here. What is interesting here is the shutter button, a large bar on the screen is a shutter button, which I think is very interesting and useful. Shutter button very clicky and very convenient to use, you can hit anything you feel like, I really like the shutter button. Fire Buton worked very well and there missifres all. We had a nice color screen with a lot of information here. The screen is very beautilful but the brightness of the screen is very low, especially when it came out, it was because of the dark bar at the top of the screen, which reduces the brightness of the screen. When you were in the room, basically all you see is very good, but when you get out, it could be a problem.
To activate the mod must click five times on the shutter button, the same should you do when you want to disable.
When mod lamp wattage mode, you’ll see:
– The battery indicator
– Preheat mode and
– Power, which seems incredible here
– coil resistance
– to blow
– time vaping
As I said, this mod is one of the get code vaporesso luxe kit out there, I really like how it looks, mod is very nice in my opinion. Another option you might here is pre been normal, when connected to a pre been normal when the shutter button will give you a little more power and a little fall, which means they will shoot very quickly pressed, but if you do not like, you can put gently preheating. The chip works well, the board omni 4.0 is very good, I use this mod without any problems, everything works as it should. This view is very nice with a lot of information, but I like using the shutter button is transparent to the best brightness, personally I do not care, but it would be best for you.
To adjust the power consumption of the plus and minus buttons and a gradual increase or decrease of 0.1 W of power, but if the power button up or down as much as 1 mg maintained.
To enter the menu, you have to hold down the Select button or press the Select button 3 times.
From the menu, you can see:
2. VW H
3. VW N
4. VW S
To move, you have to use more or less the button when you want to enter a submenu you have to press the select button, press the shutter button to exit the menu.
This mod also has a mode VV know many people like in the SP mode, you can use the coil resistance of 0.03 ohms.
Mod supports three types of batteries which is perfect for me because I want to use battery mod 21700. Vaporesso pro armor is very comfortable, feels great in hand, one of the most comfortable mods out there, trust me it is very convenient to use and maintain. It is true that the model has a black screen, but I still love him because of the way he looks and all information on the screen, here we also have a lot of options and settings that personally also similar.
I think pro mod armor is very good and I recommend it.
You can buy it here: vaporesso vapes https://www.vapeciga.com/collections/vaporesso