smok vape vaporesso

How To Extend The Life Of Your Evo Twist Two Minute Battery Charger


The evo twist & scream curling set is an absolute winner, delivering everything you would need for bouncy, thick, healthy curls in an instant. With a shampoo, co-brush, conditioning treatment and styling wax, it is a truly unique gift set to make the day of anyone who loves her curly locks. Get involved. You’ll never get a chance to try the hair products and techniques that make this set so popular before you – and it will make your curly locks even more amazing.


The full body rinse is an essential part of the evo twist & scream package. This is what helps you to lock in all the moisture and minerals, giving your locks full body, volume and shine. The result after the rinse is soft, bouncy and very straight. This shampoo is also a great option for women who have thin or fine hair, since it leaves their hair feeling very soft and shiny. It is also a fantastic option for those who are used to using chemical based hair care products and may be sensitive to them.


The evo twist & scream curl pack comes with two bottles – a shampoo and conditioner, with one bottle being smaller than the other. Both bottles should be used in the washing machine, and both should be left in the hot water for the time specified. The shampoo should be left in the shampoo bowl for around five minutes, whilst the conditioner should be left in the conditioner bowl for the same amount of time. The shampoo should then be left to soak for around ten minutes, before being left to sit on the dry hair. This ensures that both products are thoroughly mixed, and the best result is achieved when the both products are combined together.


After use, both products should then be rinsed well, and you will need to ensure that your curly hair is completely dried before blow drying. The evo twist & scream curl pack comes with a special drying solution, which helps to lock in the natural moisture, as well as heat and environmental factors. This ensures that your hair is completely dry before blow drying. It is important to note that regular use of these products could lead to excessive hair loss, so if you notice that your hair is going thin or becoming extremely fragile, it is best to apply and leave on these products for a shorter period of time than you would normally.


After applying the evo twist & scream curl pack, it is then important to apply a thick layer of the wash/conditioner, and use a brush to gently spread the product over your scalp. After this, it is then important to massage the shampoo and conditioner through your hair, working from the roots upwards. Massaging through the hair using this method helps to detangle your locks, and add shine and bounce to your locks. When shampooing, it is important to ensure that you do not rub your scalp, as this can cause damage to the hair shaft.


As a final step, it is then necessary to rinse the ends of the hair, to remove any excess moisture. To make this easier, I would recommend you turning your electric hair drier upside down, and setting it to spray low (if you have a digital one). Once this is done, you can then place the battery into the comb, and start rotating the brush through large sections of hair. If you find that the brush becomes clogged, I recommend using the wash & brush head until the brush passes through the entire length of your hair, and then turning it upside down, and setting the brush to low. You will need to do this up to three times to loosen the hair brush clog, and once done, allow it to dry. If the brush is still too wet after this process, you can repeat the step in the reverse.


To ensure the longest durability of the Evo Twist II, I recommend that you use a hairbrush with an excellent surface to work on. The brush should be made from a material that will not stick to the hairbrush, or cause any damage to the hairbrush. I would advise you to go for a plastic brush, as it is more likely to adhere to the hairbrush, and not cause any damage to it. Using a metal brush can cause damage to your hair if you are not careful, and can cause the battery to run out of power, and thus render the device useless.


Finally, as the last step, I would recommend that you turn the power button on your Evo Twist II, and wait for it to charge. The first time you do this, it is advisable to leave the device on, so that the battery does not get drained. Charging the battery whilst it is on will allow the battery to have a life span of about 5 clicks of battery life, which is very good. Once the device has reached this point in life, the power button must be pressed and left for a second, then you can plug in the USB cord back into the computer, and upload your latest photo or video clip that you want to share with the world.

lost vape orion relx airistech smok Uwell vaporesso voopoo WISMEC

Yocan UNI S Box Mod 400mAh

Yocan UNI S Box Mod 400mAh


UNI S Mod is an updated variation of Yocan UNI Mod. It is housed in solid top quality Zinc Alloy Shell, delicate in metal structure and non-scratch. With resilient top quality and also trustworthy performance, it is developed with an elevation slider matching all styles of atomizers. For example, you wear not have to stress if your atomizer is too high or too short, the UNI S will let you change the height of any oil atomizer. On top of that, the trademarked universal adjustable width makes it compatible with various oil atomizers. Powered by a 400mAh integrated battery, it is billed via a Type-C port. It features a 10s preheat feature and variable voltage alternative( Low/Middle/High). Furthermore, there is a hanging hole for your lanyard or vital ring, keeping your tool secure, secure, and accessible.


Main Features:

  • 400mAh built-in battery
  • Flexible width as well as height fit atomizers with size 6-12mm
  • 10 Secs of preheating feature
  • 3 Voltage degrees: Low/Middle/High
  • Magnetic 510 string adapter
  • Type-C charging port
  • Developed with hanging opening


    Brand: Yocan

    Product Name: UNI S Box Mod

    Battery Capacity: 400mAh

    Called for resistance: > 0.7 ohm.

    Thread: 510.

    Billing Port: Type-C.

    Color: Black, Silver, Black, Powder Blue, Apple Environment-friendly, Smok nord.

    Bundle Materials:

    1 x UNI S Box Mod.

    1 x Magnetic Adapter.

    1 x Type-C Cord.

    1 x Instructions Guidebook.

    UNI S Mod is an updated version of Yocan UNI Mod. With long-lasting top quality as well as trusted performance, Koko primes are constructed with an elevation slider matching all designs of atomizers. You do not have to stress if your atomizer is too high or too short, the UNI S will certainly allow you to adjust the elevation of any oil atomizer. In addition, the trademarked global adjustable size makes it compatible with various oil atomizers. Powered by a 400mAh integrated battery, it is charged by means of a Type-C port.



Review of vaporesso gen mod swag target gtx vape zero luxe

In this review, I’ll look at the goal vapeciga vaporesso gen mod – mod pod sub-ohms. Vapesourcing sent my goal PM80 for the purposes of this review, be sure to check their website for the latest equipment generation vaporizer the best price. For more information about destination PM80 Vaporesso

Specifications and features
Size: 102mm * 24.8mm * 33.4mm
Battery: Built-in 2000mAh
Output power: 5-80W
Cartridge Capacity: 4 ml / 2 ml (PDT)
Display: 0.96 “TFT
Load current: 2A
Charging ports: Micro USB
Coil Resistance: 0.2Ω GTX mesh coil (45-60W), GTX coil 0.3Ω Mesh (32-45W)
Color: Red, Green, Black, Blue, Brown, Silver
What’s in the box
1 x coil mesh GTX 0.2Ω
1 x coil mesh GTX 0.3Ω
Airflow 2 x silicone plugs
1 x USB cable
1 x User
Warranty Card x 1
1 x map Reminders


PM80 target has the same elegant appearance swag mod show new are known. The PM80 has a metallic finish and color TFT display polished measuring 0.96 inches generous. True, PM80 is a fingerprint magnet, but still looking for a wonderful device.

The PM80 is available in six different colors. A silver version with a geometric pattern on the handle, as well as carbon fibers and the version of the resin. With a height of 102 mm, target PM80 has a similar shape to other popular sheath mods, as Vinci and Voopoo Boost Aegis.

PM80 destination screen deserves special mention. This is one of the largest screens in a pod mod, and even includes an option to change the color scheme. 0.96 inch TFT display very sunny and bright, with all information normally on the model size.

chip axons
PM80 Target Chip Axon Vaporesso this card, which is the same chip and Swag Mod Gen II, which I recently reviewed. Axon The chip is equipped with several devices comprising pulse strong enough mod, providing constant power to breathe. VW fashion smarter detection coil resistance and provides several recommended power read on the screen.

The PM80 has a menu with several options normal size. You can choose to run variable PM80 watts or variably voltage. There is also a breath meter that gives you a weekly view of daily breathing. Another great feature is a super fast shutter speed 0.0001 seconds. All these features make the target feel more like a scale model PM80 and less like a pod.

PM80 Meta Vaporesso battery was integrated. The battery has a capacity of 2000 mAh, which is pretty cheap compared to the previous pod mods. The only drawback with pulse mode is that the battery works faster. At PM80 60W in use without pulsed mode, we get about 000 inhalations on a single charge.

PM80 is charged by the micro-USB and has a fast charge current is 2A. I found the booty II after the performance at 20% a marked reduction in energy production is the same as PM80. This feature protects the battery discharge, but it means a total capacity is somewhat reduced.

PM80 objective has no effect, so you can not use the device while charging. But with a quick charge 2A it takes 43 minutes to move 20% of its capacity. I like that the screen even tell you exactly how long until full charge is a feature I like most battery device could be integrated.


PM80 objectives sheath mod known sub-ohms. Vapeciga vaporesso target have different coils GTX are available that are compatible with PM80 Target and other pods as Vaporesso, Target PM80SE, PM30 and GTX Objective One. Objective PM80 was designed with vapers direct ii lung in mind and compatible with all coils covering the GTX. There are two styles of mesh with the resistance of 1.2Ω coil and rollers MTL DTL DTL and restricts available coils ,.

Each coil GTX has a lattice structure and is made in two nichrome or Kanthal. The RBA is also available for those who like to play them with 0.7Ω resistance is recommended. Coil with a mixture of hemp and cotton nonwoven fabric for long-lasting flavor. Vaporesso offer a choice of two coils in the table, the best 0.2Ω and 0.3Ω GTX GTX vaped vaped for 45-60W to 32-45W.

Included in the box are two pods, each with a capacity of 4 ml. Each pod has a reduction owners fall PM80 and fill the bottom. There is a spare rubber stopper in the box if it is damaged or missing. The coils are easy to install and help put the rubber O-ring. coil is fit firmly veil, but I realized after a few days of use, there is little visible residue juice in the battery contacts.

Pod filling is easy, and the hole is not bottled board adjustment problems. Replacement pods can be purchased separately in packs of two. 4 ml capacity is great, especially because it is a high-ohm watt MOD to find Pod recharge more often than usual. magnetised pods and easy to clip in and out of the battery. However, a very strong magnet so you should have a problem with your fly pod if dropped.
Target PM80 capable of a maximum output power of 80W. For secondary feed tank most users ohm enough and comparable to the one or two-18650 mod. But it is important to note that most of the recommended GTX 60W electric coil network. The only way that you will be able to use the power of maximum PM80 if the coil is used RBA.

Vaporesso latest version of single-purpose call 18650 SE PM80 launched. This version has the same chip and the design and appearance. If PM80 is also compatible with GTX coil. However, PM80 SE has a vertical screen that is smaller and does not have a color. 18650 This may be due to take up some space on the screen.

I really like using objective gtx vape get code because I built in the comfort of the battery. But if you want a little boost to value the ability to see the target PM80 SE. If you want to experience the full 80W, then it is definitely worth buying the RBA coil. GTX coil offers enough good taste and promises to be durable. steam with a target PM80 is up to the sub-tank ohms popular. What makes PM80 attractive to a wider range Vapers is that it was designed specifically for vaping directly lungs.Pro
Interest PM80 is a great looking mod pod, colorful and elegant designs.
The PM80 has an action and a comfortable size makes it perfect for travel.
axons offers several advanced features fries were really useful in pulse mode and Smart VW.
4ml large capacity, much larger than any other coating and the right to use the sub-ohms.
The large TFT color display, and provide all the information you need.
VW Intelligent and very useful impulse, PM80 is more like a full-size models.
By coil 0.2Ω I had some initial problems with it in good contact with the battery. It is important that sufficient coil inserted into the vessel to prevent leakage or read resistance.
Although the goal of PM80 80W networks allow all coils are rated for a maximum of 60W. So, if you really want to make the most of the coils PM80 RBA must be purchased separately.
After several days of intensive use, I noticed a leak in the battery contacts, more than what I experienced in another pod filling are low, but definitely something to keep an eye on. PM80 Target chain vaping juice will bring hot and therefore thinner that can cause leakage.

From the vaporesso luxe click in the camera, you can see inside the magnet slot and can see the connection here. Also on the upper side of the mod you can see the three holes on each side of the airstream.

Usually it receives the airflow 4 is necessary and can adjust the air flow. In the device, you can see the USB port can be used to charge the battery, the device supports Charing 2A. The device is powered by a battery and can be 18,650 to top of the stack to the bottom mod. With regard to the cover of the battery, and it works well when it is placed in the battery when the device is stirred without noise. On camera, you can see the shutter button, the screen and the plus and minus buttons. the shutter button is highlighted and so far it works very well, plus and minus buttons are also very good. In this device, the screen is 0.96inch and not a color screen that some people like and do not like someone, screen brightness is all very pleasant and you can see everything on the screen. ” This device can be used 5-80w.
To activate it, you need to click 5 times on the fire button and turn it off, you must do the same. When the screen is on, you will see:

– The indicator of the percentage of battery
– process
– Coil Resistance
– against the coup
– W
– Better
– hojaldre time (when the shutter button is pressed)

To enter the menu, you must keep the plus and minus buttons, and enter the menu, you can see:

– Intelligent vw
– Vw
– Vv
– default
– Departure

In this device, one can use this mode vv meet new people and their way of working here vw smart and when you use this mode, the camera automatically adjusts the power of the coil is attached to the work.
You can lock the device when you click 3 times on the shutter button, you must do the same to unlock the device. When you lock your device can VAPE but you can not use the plus and minus buttons.
When the shutter button and press the button again to return to the screen.

My spirit:

Thus,vapeciga vaporesso zero is available in 6 different colors.

Design of this device is really good in my opinion, the same as the previous version and the build quality is good and there is no complaining, everything is as it should be and you can not hear the sound when you put in the battery. Similar in purpose from the previous version to use PM80 comfortable and feels good in the hand. This package is really good, all in all, you will receive more with another device, you will receive 4 recording airflow, two balls and two coils that are truly amazing. channeling practical to use, but you can not use another drop of tips here will be a con for someone. Capacity 4 ml, which is a good capacity for this device. You can refill the cartridge with no problems with the gorillas and the remnants of the cartridge bottle perfectly in place. Here screen is different and there is a color screen as in previous versions, but the brightness of the screen is good and you can see everything on the screen. In this unit, you can adjust the air flow by using out of the box, it can be very uncomfortable, but it is a big pro that we can regulate the air flow. We can stop the flow of air on one side or both sides, you also can cut the sheets and included only one or two holes if you like. There are plenty of airflow completely open and when when you stop the flow of air in fact, you can have a random mtl really nice. With this device, you will receive two rollers and the device is compatible with many rollers. Also for this device, you can buy a big head RBA. Thus, this device is compatible with the 0.2ohm coil nets, nets reels, nets 0.6ohm coil, mesh coil, coil and coil 1.2ohm RBA. As I said in the previous post, I tried a lot of coils with this device and I can say that the coil was really good. Coil for MTL is also very good in my opinion. It’s really good that you can buy or MTL coil DTL for this device and therefore the device will appeal to beginners. With a great sense of premade premade coil and coil Absolutely brilliant. Create a very simple RBA head and remember that this is a beginner starter kit can use premade coil and after learning how to build and save money RBA really good. Season with coil RBA was also very good and the air flow in the coil hole is about 2 mm, you can use to restrict or Mtl RBA DTL vaping, perosanlly I want to use this TLD limit coil vaping. I think this is another device vaporesso really nice and easy to use device, several coils are available and you can now use 18650 battery whcih was great, I personally really device.

The inconvenients:

– Do not use more than dropwise advice
– No c usb


– Choice of colors
– Good build quality
– Device comfortable
– 18650
– 4 air flow taken inside the package
– Two coils in the package
– Two cartridges in the package
– Capacity 4ml
– Easy to fill
– Cartridge nice stay in place
– a good screen brightness
– Button Fire button and the plus and minus good
– Operating Vv
– Intelligent vw mode
– Good taste
– You can use it as a device MTL or DTL
– The head of RBA

You can buy here: Vaporesso

sourcemore thanks


Comment for vaporesso vapes gen swag pm80 gtx mods zero pod luxe kit

Vapeciga vaporesso gen kit come in various colors:

– Black
– Midnight Blue
– White
– money
– Green
– Red and blue


– filling tank capacity: 5 ml / 2 ml
– Output Watt: 5-100W
– Resistance Range: 0.03-5ohm
– Simple Battery: 21700/20700/18650
– Charging current: 2A

In the frame:

– Armor Pro Mod
– 18650 Adapter
– the baby tank CASCADE (02:05 ml)
– mesh coil (0.18O) already installed
– GT CCELL2 coil (0.3O)
– USB Charging Cable
– User Guide

Baby Cascade sub-ohm tank can be purchased separately in various colors:

– money
– blue
– Rainbow
– Gold
– Black
– O bright

Vaporesso swag mod show new cascade sub-ohm baby is very similar to reservoirs cascade sub-ohms, but there are differences and different capacities. I received a baby waterfall in black and looks good in my opinion. You can see some details on the plastic cap and can see the same details in the control ring airflow. In addition to the ring airflow, you can see engraved “Vaporesso” and the bottom of the tank, you can see recorded “Baby Waterfall” and “Designed and manufactured by Vaporesso”. Sub-ohm tank diameter is 24.5 mm, 58 mm high with drops peak, the baby cascade 5ml capacity, or can buy a release capacity of 2 ml tpd.First, what I want here over filling the tank, to fill the tank is very easy and I liked the fact that there is no chance you can open up the possibility of charging, you just pull the pieces of plastic and a boost to the side, when only fill reintroducing plastic parts and ready. About coils that have received the package, two coils work well. With coil CCELL there is much less air flow, but the thread of a batch of rolls GT airflow, so if you want a tight coil CCELL tie for you but if you like a lot of airflow want more mesh coil.
steam production in the sub-tank ohm very good to force recommended, of course, more steam coils nets but also will have more power to it. solid feel, I think it’s better with a spool of thread, but you can feel better with CCELL coil. Moreover there is no leak here.
What you may not like this is when you want to change the coil, for example, you must have a metal part of the tank and unscrew the base, because if the glass is maintained or even a fireplace without a roof top deck with the basis to dump thread.

The vapeciga vaporesso pm80 is also compatible with babies animals of the coil, which is a professional network.

To change the coil needs to unscrew the base, the base has a standard thread and screw the coil at the bottom. Put on right here. As always before refueling, should privileged coil with few drops post raps to prevent and after fillable tank and used immediately. Coils works well with liquid and I use vg-pg 70-30 and leaks.From the top you can see the relationship mod crimped stainless steel, because here is very good and here you can see the gold-plated spring pin 510. You can see the attractive design and the connection 510 is here mod will not be removed from the atomizer. You are employed here every atomzier diameter of 26 mm without being false.
We have some details about the mod on both sides, you can see engraved “Armor PRO” and behind the mod that you can see engraved “Vaporesso”. Always on the side mod you can see USB port for charging and improving deivde, 2A fast charge mod operator.
At the front of the mod, you can see the buttons select the shutter button on the screen, buttons and more and less.


Gtx mods for

Just below the peak fall in one piece of plastic, the parts are here to improve the system of charging up, blocked, and because there is a possibility that the plastic parts of the upper lid can be opened at random, which is very good. In the plastic, you can see the designs that will be easier to pick up the pieces and interesting. You can unscrew the plastic, but has a reverse thread. If you open the top section, you can see under the piece of metal and you can see how the charge here. Top fill out here is very interesting and something different from the other tanks bits. For the filling, you need to take a piece of plastic and interesting and can be ruled out, also on the upper deck, you can see where you have to push to open it. Holes for liquid letter is fine, maybe you will not have a problem to fill the tank.

Waterfall tank with a glass tank, this tank has a capacity of 5 ml was very nice. In the package, you receive the glasses back up if they break one.

To lock the device, you need to zero vape pod click in the shutter button, the same you have to do to unlock the device. When the model is locked, you will not be able to use the plus and minus buttons, but still be able to use the shutter button and the vaporizer. When the device is locked when each key is pressed as a small screen, you will see how to unlock the device and how to turn it off. When the MOD is off the screen, you can see the map and software versions.

There’s nothing here crackles buttons, very clicky, everything is here. What is interesting here is the shutter button, a large bar on the screen is a shutter button, which I think is very interesting and useful. Shutter button very clicky and very convenient to use, you can hit anything you feel like, I really like the shutter button. Fire Buton worked very well and there missifres all. We had a nice color screen with a lot of information here. The screen is very beautilful but the brightness of the screen is very low, especially when it came out, it was because of the dark bar at the top of the screen, which reduces the brightness of the screen. When you were in the room, basically all you see is very good, but when you get out, it could be a problem.

To activate the mod must click five times on the shutter button, the same should you do when you want to disable.
When mod lamp wattage mode, you’ll see:

– The battery indicator
– Preheat mode and
– Power, which seems incredible here
– coil resistance
– to blow
– Volt
– time vaping

As I said, this mod is one of the get code vaporesso luxe kit out there, I really like how it looks, mod is very nice in my opinion. Another option you might here is pre been normal, when connected to a pre been normal when the shutter button will give you a little more power and a little fall, which means they will shoot very quickly pressed, but if you do not like, you can put gently preheating. The chip works well, the board omni 4.0 is very good, I use this mod without any problems, everything works as it should. This view is very nice with a lot of information, but I like using the shutter button is transparent to the best brightness, personally I do not care, but it would be best for you.

To adjust the power consumption of the plus and minus buttons and a gradual increase or decrease of 0.1 W of power, but if the power button up or down as much as 1 mg maintained.
To enter the menu, you have to hold down the Select button or press the Select button 3 times.

From the menu, you can see:

1. Exit
2. VW H
3. VW N
4. VW S
5. CCW
6. SP
7. VV
8. CCV
9. SS
10. NI
12. M1
13. M2
14. BP
15. Set

To move, you have to use more or less the button when you want to enter a submenu you have to press the select button, press the shutter button to exit the menu.
This mod also has a mode VV know many people like in the SP mode, you can use the coil resistance of 0.03 ohms.

Mod supports three types of batteries which is perfect for me because I want to use battery mod 21700. Vaporesso pro armor is very comfortable, feels great in hand, one of the most comfortable mods out there, trust me it is very convenient to use and maintain. It is true that the model has a black screen, but I still love him because of the way he looks and all information on the screen, here we also have a lot of options and settings that personally also similar.

I think pro mod armor is very good and I recommend it.


You can buy it here: vaporesso vapes

sourcemore thanks