SMOK RPM160 VW Pod Mod Kit

Here are a cheap deal to buy Smok RPM160, a more powerful version of the above systems as RPM80 sheath, RPM40 and RPM Lite. RPM160 has a new chipset, 160W, quick cooking 5ml nail color display, dual protection, easy to fill and exquisite design. AIO vaporizer system is sold with a carbon fiber finish in the following colors: 7 colors, black, blue, gold, red and silver.

Smok RPM160 Mod
As for the design, Smok RPM160 is slightly larger than the other PMR devices Smok but the dimensions are still unknown as of this writing. What we do know is that all versions of the zinc alloy body RMP160 with carbon fiber finish and color of the rainbow in the sky selection, black, blue, red, gold and silver.
On the control side, you will see a large color TFT screen of 0.96 inches with a new menu and all navigation easier for third selection button plus buttons. All statistical vaporizer on Smok RPM160 (current watts, voltage, resistance atomizer, operating mode, battery level and rinsing) is characterized by a crystal clear, so you will never look twice to get the information you are looking for. A shutter button and ergonomic greatness can also be seen at the top of the screen.
What distinguishes RPM160 mod apart from the crowd is that it uses two power supplies and long vaping 18650. Can recharge the cell through the loading port interface is reversible type C, which is very easy to connect Smok RPM160. In addition, the Ministry of Defense can extinguish up to 160 watts of power through a new brand more IQ-160 results in rapid fire like lightning. Adjustments can be made watts 1 watt for a wide range of power options. Finally, there are many safety features, including low shear stress 10 seconds short circuit protection and high temperature.

Smok RPM160 thimbles and spools
To increase the capacity of Smok RPM160 vape uncharged, each module can store up to 5 ml of E liquid. However, if you need a refill, the process is simple with the top hole filling arrested silicon, ensuring not charging leak.

For flexibility, there are two available for teeth RPM160 and is identical to that found in RPM80. The first option is the most pods RPM with replaceable coils that operate with many other Smok Pod systems. However, the use of the new cartridge is recommended conical mesh coil RGC. This header use of technology to produce powerful explosions nexMesh with the huge success of the throat and lots of flavor. In addition, this cartridge RPM160 Smok has a unique conical configuration in its kind of operation the flow of air in the water vapor is concentrated as it is channeled to the point falls while maintaining the taste -liquides and favorites of origin.

Features Smok RPM160

Sheath mod box system
Measurement: Unknown
Weight: Unknown
color options: silver carbon fiber, carbon fiber red, gold, carbon fiber, carbon fiber blue, black bow carbon fiber carbon fiber
TFT color 0.96 ”
Change font color
menu Vertica
New game CI-160 chips
0.0015s shots
18650 double
Reversible Type C USB charging
2A fast charging current
teeth 5 ml
The first port of difficulty filling
mesh 0.4ohm RPM Pod
cone mesh 0.17ohm RGC Pod
installing the coil push / pull
easily observe the need to load
adjustable power: 1W to 160W
the output voltage: 0.5 V to 8 V
Resistance Range: 0.1Ω to 2.5Ω
Protection of safety
low tension
10s cut
High temperature

As part
With the purchase, you will receive the jacket RPM160 RPM, coil mesh sheath WCR 0.4ohm RPM, the networks 0.17ohm cone-shaped coil RGC, cable and manual loading


Dovpo Topside Lite TC Squonk Mod Kit

Top Lite is the latest mod Squonk Dovpo Chronicles Brian and steam. The Lite is a battery mod mod Topside Topside 18650/20700/21700 90W but with little PCTG and a polycarbonate shell. It has the same power of 90 W and 10 ml bottle filled with maximum output Squonk above.
The big difference is only part of the superstructure Squonk Lite can be removed and replaced with a lid which makes it a regular mod box. Squonk is a special case mod mod in a single device.
superstructures mods became popular Squonk tail Squonk 2019 sets its bottles filled with a plug; Just open the lid, fill the bottle and is ready for new Squonk. This eliminates the confusion of having to remove the bottles to fill Squonk Superstructure directly to the device a great success.
Kit superstructure Lite also comes with a variant of the RDA. It is after four coils, such as updating a double reduction RDA RDA Digiflavor (also designed by Brian TVC).
Mod Lite Topside Squonk? And if it is, it is the value of the kit Varian grab RDA?

  • 1 x Accessory Bag
  • 1 x Variant RDA
  • 1 x Micro USB Cable
  • 1 x Topside Lite Mod
  • 1 x Box Mod Battery Cover

Topside Lite

  • 96” OLED Display
  • Top-Filled Squonk Bottle
  • Squonk Mod or Box Mod Mode
  • 90W Maximum Wattage Output
  • Power, Bypass, TC & TCR Modes
  • Zinc-Alloy & Polycarbonate Construction
  • Single 21700/20700/18650 Battery Mod

Variant RDA

  • 24mm Diameter
  • Side Airflow RDA
  • 304 Stainless Steel
  • Four Post, Dual Coil Build Deck

Design And Build Quality
Top Lite has the same general shape as the top face of 90W, but it is only bigger in every way. It is a little bigger, wider and thicker, but not by much. He also feels the same weight that is too heavy at all. It is a beautiful model and feels good in the hand.
Both changes are very similar to each other, but it is easy to differentiate from above Lite due to the polycarbonate section. Squonk This section has a dark hue, but I can still see my battery and squonk inside the bottle. It looks good, but is easily scratched. The rest of the Lite is zinc alloy superstructure. I use painted dark red color that blends in black at the bottom.
The Squonk section is detachable and held in place by a magnet in the model, two magnets at the top and a pin on the upper mod Squonk. When connected to the section Squonk is very strong and robust and does not move at all. The Squonk bottle has a large capacity of 10 ml and is very smooth and soft. It is very easy to Squonk with this mod, because it does not have to fight.
A the same as other modifications bottle superstructure Squonk family can be filled by unscrewing the upper cap. The thread on the cap is smooth and is much easier to remove and replace the other mods Topside. filler cap removed reveals two large filling ports can accommodate all nozzle size bottle.
The battery compartment is clean and fit well a battery or 21700 20700. The superstructure Lite also comes with a locking sleeve using a 18650 18650.
Removing the Squonk section allows you to convert regular box, battery Mod Lite superstructure. To do this, you should also unscrew the pin Squonk found in the Ministry of Defense. This pin is so small and easy to lose your best to stick with it! Fortunately, Dovpo includes two additional pins in the accessory bag if you happen to misplace.
Squonk with the pin removed simply set the door of the battery cover and Lite From above it becomes a completely different model. It is compact and super ultra slim that is perfect to get out and around. I can even put it in my pocket easily. The battery cover does not move at all, as it is held securely by the same three magnets holding section Squonk.
Buttons and screen on top Lite is identical to above 90W. The shutter button is large and round, while the buttons are small and round. Shutter button on top Lite is easier to activate the superstructure 90W and does not take much pressure. I had this result to accidental blow, but for me it is a fitting welcome. All buttons feel good and make a satisfying click when pressed.
I am impressed by the build quality on the upper side Lite. It is very well built and everything perfectly. How did the removable part Squonk is bold and innovative, but Dovpo fully implemented.

Features And Functions
Topside Lite mode power (power), the bypass mode, mode control of the temperature and TCR. In the power mode, you can draw from 5-90W which is standard for the model of the battery. Media temperature control with nickel, titanium or stainless steel and a range from 200 ° to 600 ° F.
The display shows the current mode, power, current, voltage and coil resistance. There is also an indicator of battery life at the top right of the screen. Top Lite is just as easy to use with its predecessor.
There are not many other amendments change the superstructure here, I can not imagine that the performance will be very different, either – and that’s a good thing.

Topside Lite keys combinations
On / Off: Five click on the fire button.
Enter the options menu: fire and Maintain left button.
Lock / Unlock fire button: Click the fire button three times.
Setting the lock buttons: Hold down both buttons together.
Stealth Mode: With the Press Locked knobs on the right adjustment button quickly three times.

RDA variants
If you buy a Lite kit from above, then also GDR variants. It reminds me a lot of Digiflavor the deposits only and there is a good reason for that; which it was designed by the same man, Brian TVC.
See the AC side of the air flow, it was like falling in only two columns of four air holes. It also has the same niche at the base of the platform to hold the cover in the center of the whole.
Options airflow in this crazy GDR. Connect up a series of steps that, when the airflow allows it to be placed in almost every way. These range from interesting DL DL ventilation pull a little limited.
You can close the first two holes or two lower holes or four holes in the top or bottom of the four holes. You can close the hole or circular hole column “L”. You can also close a hole individually according to your wishes. He’s crazy and amazing at the same time.
Although the choice of air airflow Pro for me is the ease of being closed. Not suitable and slots at the base of the platform is not much to do either.
development platforms like autumn. She has four positions have high tendency that the legs cut license after the roller installation. Message secured with flathead screws. There is plenty of space in the building platform that can accommodate large rolls easily. The property has enough juice in the air as well.
The center of the building platform has an interesting Squonk valve. Instead of having to exchange 510 pins, simply loosen the Squonk valve with a flathead screwdriver and ready for Squonk variants. EJuice is Squonk this central valve.
NOTE: If you squonking so be sure to loosen the valve before the construction of the variant. Otherwise, it will be difficult to clear debris from the spool and poorly constructed.
Performance: From Up Lite Kit
Alternatively RDA use a pair of coil 3 mm ID fluid Clapton 0.20ohm. I use 70VG, 6 mg of nicotine eJuice my tests. After crossing many options airflow, closing four holes, I found the airflow down and let the first four open. This gives the best flavor and hot 45W randomly.
The draw is DL and smooth air flow is somewhat limited. It is almost silent without whistling or turbulence.
The taste agrees with variants and I must say that autumn is the most delicious char. The flavor is not as complete and correct to the best of my new eJuice current RDA. flavor more subtle or complex is not done correctly in the GDR.
Top Lite is more reliable time I instantly attracts and produces up to 90W without breaking a sweat. One minor annoyance is that when waiting, the screen has some buttons to light the fire. It can be frustrating, but it’s not a big deal.
Squonking very easy. Squonk repairs and perfect mechanism with little effort required. Squonk Dovpo actually improve the system in this unit because I have not had a problem with it.
Top Lite works as well as the battery boxes models. Small and compact because my other mods replace a single battery, it uses a lot and will continue to use in the future.

The Topside Lite is another home run for Dovpo and Brian. It makes everything connected with Topside series that makes them so good while carrying the modular design of new flawless execution. Design and build quality is excellent. The device looks and feels good and everything together as it should.
DDR variant is a medium tank but it was not bad. If this will be your first mod Squonk and you do not have the GDR, this kit is not a bad choice. But if you own Squonk able RDA, you better just download the mod.


Excellent List Promotion Good Vape Uwell starter kit

$ 45.59 complete kit 80W Good nunchaku
Main Feature:
Container 1. Volume: 5 ml
2. Material: stainless steel and quartz glass and copper and silicon
3. Power range: 5-80W Caliburn
4. A new generation Well vape e smoker checks in a separate tube rack mod r + D.
5. Different modes: TC performance (NI, SS) mode, the bypass mode.
18650 6. Place the battery Uwell koko or charging via USB. Ignore battery contains
just replace the cap of the spool 7

Vapeciga is the best online store for a large evaporator.
big bill, you can subscribe to a good price.
If you help online sales.

$ 32 Good Turn 20 and 22. The limited edition kit
Main Feature:
1. Great gift for Valentine’s Day
2. Good WHIRL 20 Kit – 700mAh internal battery – 20.2mm Diameter – 110.8mm Width
Now 22 Kit WHIRL – 1600mAh internal battery – diameter 22.2mm – 117.5mm height
3. The integrated monocoque design
4. The glass base quartz Caliburn
5. Maximum Watt: 25W
6. Output Voltage Range: 3.0-3.8V
7. Resistance Range: 0.5-0.7ohm
8. button operation
Intelligent LED display. 9
coil system approach Well corona Pro 10 – the professional system optimization of basic taste
11. Coil 0.6ohm Whirl – element Nichrome
12. The rollers uwell pods crown replacement Well Plug-n-Pull
13. Protection of good owners

less than the price of the company’s brand.
You will receive the amount of $ 1000 in your account.
Regiater by: evaporator purchase Vapeciga

$ 46.15 Well Ironfist 200W Starter Kit
Main Feature:
1. The main points of the experience
2. Beautiful appearance, ergonomic design
3. Double-18650 Source with a maximum power of 200 W
4. With a variety of modes and safety functions
5. The system shows a simple interaction with the user friendly interface

$ 53.10 Corona 4 Good Kit
Main Feature:
1 volume containing: 5 ml (6 ml with glass bubble)
2. Materials: zinc alloy and stainless steel and glass and silicon
3. Power range: 5-200 W
4. Coil Features: Paprika Well
SS904L dual coil 0.2 Ω = 70-80 W
SS904L double coil 0.4 Ω = 60-70 W
The primary coil FeCrAl UN2 0.23Ω = 60-70 W
5. The patented technology Nunchaku uwell, no leakage.
6. double coils SS904L to improve corrosion resistance, lasting flavor.
7. UN2 integrated coils have what might be called the best flavor.
8. The method of SS904 SS904 Well nunchaku TC innovative coil crown.
9. Properties delivered PCBA conformal coating, anti-corrosion are very good, to protect life and developing the base unit mod.
10. The establishment of reliable performance and fast and solve new PCBA.

$ 33.51 nunchaku Good DDR Starter Kit
Main Feature:
1. single bag, comfortable to wear
2. With the support of the Uwell crown media Caliburn and a maximum power of 80 W 18650 pods
3. Easy to build a platform to facilitate the development of
4. The system airflow double or twin coils
/ 5. switchable current / SS / Ni
6. Compatible with Squonk Mod

$ 35.00 Good hypercar Starter Kit
Main Feature:
1. Optimize performance with an ergonomic design, easy to carry in your pocket
2. Battery technology Koko 18650 Well can consume up to a maximum power of 80 W.
3. 3.5 ml capacity filled with e-juice
4. Structure and magnetic triggers make silicon battery near convenient and easy to use, click
sufficient to replace, when the coil 5. Plug-voltage structure and light Well nunchaku
6. Power Mode / Experience CT / shunt vaping
7. vaping experience MTL and DT switchable

Hello friends, Caliburn
Vapeciga Now here’s a starter kit for you.
Starter Kit is for sale.